Melinera MWBA 5 A1 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
4
GB
4. Items supplied
1 Christmas street (consisting of 5 houses)
1 House lighting with 4 wired LED modules
2 Type AA, LR6 batteries (each 1.5 V)
1 Set of operating instructions
5. Inserting the
batteries
WARNING! Risk of material damage!
Be sure to observe the correct polarity when
inserting the batteries.
1. Figure A: push the battery compart-
ment lid5 in the direction of the arrow
and open the battery compartment lid
by lifting it up.
2. Figure B: insert the 2 type AA, LR6
batteries (each 1.5 V), as depicted.
3. Lower the battery compartment lid5
and push it in the direction of the arrow
as far as it will go.
6. Installation and
operation
1. Insert the LED modules3 into the recess-
es at the back of the houses4. The ca-
bles must point downwards when doing
this. Carefully press together the sides of
the LED modules, but do not exert too
much pressure on the back of the hous-
es4.
2. Plug the connecting plug2 into the con-
necting socket6 of the house1 with
battery compartment. The groove of the
connecting plug must point downwards
when doing this.
3. Switch on the lighting of the Christmas
street by sliding the on/off switch7 on
ON.
The lighting is switched off by sliding
the switch on OFF.
NOTE:
the house
1
with the battery compart-
ment can also be operated on its own.
7. Cleaning and
storage
WARNING! Risk of material damage!
Remove the batteries if the device is not go-
ing to be used for a longer period of time.
Otherwise, the batteries may leak and dam-
age the article.
Clean the article with a brush or feather
duster.
Press the sides of the LED module3 to-
gether carefully and pull them out of the
housing4. Carefully pull the connecting
plug2 out of the connecting socket6.
Please pull on the plug, not on the cable.
Choose a storage space which does not
expose the article to excess heat or
dampness.
8. Disposal
The symbol showing a wheel-
ie bin crossed through indi-
cates that the product
requires separate refuse col-
lection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
__RU101272_B3.book Seite 4 Freitag, 20. Juni 2014 3:56 15
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 45 46

Comments to this Manuals

No comments